Multi-Mount Continuous Monitor Ver más grande

Multi-Mount Continuous Monitor

19651

Nuevo producto

Multi-Mount Continuous Monitor with North American Plug

Más detalles

Más

  • Single Workstation Continuous Monitor
    Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
  • IMPROVED Operator Alarm
    Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent
  • NEW Mat Monitor Switch
    Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
  • NEW Audible Alarm Adjustment
    Sets the audible alarm volume from loud to louder
  • NEW 19653 Remote Alarm Accessory 
    Connect to the Multi-Mount Monitor and place in the operator’s field of view to alert operator of alarms
  • Desco Wave Distortion Technology
    Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
  • Park Snap
    Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
  • Single-Wire Impedance Design
    Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
  • 1.2 Volt Operator Test Voltage
    Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
  • <50 Millisecond Alarm Response Time
    Identifies failures and intermittencies that inferior technologies miss
  • Continuous Visual and Audible Alarms
    Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
  • Calibration Verification
    Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
  • NIST Calibrated with Certificate Included
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. 
  • 100-240VAC Power Adapter with North American Plug
    Works with standard electrical systems in North America, Japan and Asia
  • Made in the United States of America

4 otros productos en la misma categoría: